ANSUL 14091 MODEL 10, RED LINE 20LB FIRE EXTINGUISHER VEHICLE BRACKE
Press and move to zoom.
Mouse over image to zoom.

ANSUL 14091 MODEL 10, RED LINE 20LB FIRE EXTINGUISHER VEHICLE BRACKE

Product Code: ANS14091

The Model 20 Vehicle Mounting Bracket is used in cabs and compartments of over-the-road light trucks and automobiles and offshore oil platforms or sea-going vessels. These brackets are most useful where vertical mounting of the extinguisher is not possible, and where the extinguisher must be restrained. Not for high stress or external vehicle applications.

Thes bracket is welded, constructed of heavy gauge steel with standard finish or red corrosion resistant baked-on powder paint. The overcenter toggle action of the clamp arm employs the closing tension to lock the arm tightly around the extinguisher while still providing quick and easy access. Resilient pads grip and support the extinguisher, minimizing movement regardless of the bracket mounting position. Holes are provided for mounting the bracket by the back plate or by the base.
$120.00 /EACH
List Price: $12.00 /EACH
    • EACH
  • Quantity Available: 21
•  Location and Compliance – A hanger or bracket establishes a proper location for the extinguisher; there is less tendency to move it out of the way. Certain regulatory agencies, such as OSHA, require that extinguishers be mounted at certain locations and specified heights from the floor.
•  Accessibility – Extinguishers are more visible and more accessible when raised from the floor by a mounting device.
•  Protection – Extinguishers which are allowed to sit on the floor (or ground) are more likely to be bumped by mobile equipment, knocked over by pedestrian traffic, and subjected to rust damage at the base. They are also a greater danger to pedestrian traffic than properly mounted extinguishers.
• Model #: Model 20
• Capacity (lbs): 20
• Height: 18.5 in
• Width: 12 29/32 in
• Depth: 4 1/2 in
Average Rating:
Rate this product: